قیمت دوربین مداربسته تی وی تی TD-7550AS D/IR1

توضیحات

قیمت دوربین مداربسته تی وی تی TD-7550AS D/IR1

قیمت دوربین مداربسته تی وی تی TD-7550AS D/IR1

همکار گرامی جهت اطلاع ازلیست قیمت همکار کلیک فرمایید.

برای مشاهده محصولات تی وی تی کلیک کنید

با سلام و عرض ادب خدمت شما عزیزان گرامی

شرکت فنی و مهندسی علم و صنعت

سالیان سال همواره به عنوان بزرگترین وارد کننده

و پخش کننده دوربین های مدار بسته با برند های نایک ویژن Nikvision ,

هوبانتی Hubanti ,هایک ویژنHikvision ,داهوا Dahua  و سوئیچ و تجهیزات شبکه

با برند NKTECH مرتبط با سیستم های حفاظتی و امنیت، در سطح کشور مطرح بوده است.

مارک های معتبر جهانی نیز دیگر محصولات عرضه شونده توسط این شرکت را تشکیل می دهند.

 

 

اطلاعات فنی:

 

 

 

 

 

 

 

 

How to add SV3C IP cameras to the Avalonix NVR

How to add SV3C IP cameras to the Avalonix NVR

CCTV Camera World’s NVR systems allow for the use of some 3rd party IP cameras to record and detect motion. This is highly dependable on the manufacturer of the IP camera, and the firmware that is currently installed on the camera.

Compatibility falls under the ONVIF protocol that does not guarantee that a camera from

one manufacturer will work with a recorder from another company.

We gladly test IP cameras for compatibility with our equipment before

selling an NVR to a potential customer. One of the home consumer

brands that does work over the ONVIF protocol with our equipment is

SV3C that is commonly found from online retailers.

In this guide we show you how to connect an SV3C camera to the Avalonix NVR.

It is important to note that ONVIF compatibility may change at any time due to firmware updates by the camera manufacturer.

The model numbers that were tested from SV3C for this article include:

B08POE-3MPL-A
B08POE-5MPL-A
B08POE-8MPL-A
You can connect SV3C Cameras two different ways:

Connection over the network
Direct Connection using the NVRs Plug and Play PoE ports
Using an SV3C IP Camera over a network
Using a Security Camera over a network can be an easier way to operate an IP camera system. This allows for cameras to be placed anywhere where there is local network access. NVRs can capture IP camera streams over a local network if they do not have PoE ports, or it is easier to connect a camera through the network. This setup requires the following:

SV3C IP Camera

PoE switch or PoE injector to power and network the camera
NVR from CCTV Camera World

1) Connect the SV3C camera to your PoE Switch

This step involves connecting and providing power to the camera. Make sure that you know the IP address, username, and password that is set on your camera before attempting to connect it to the NVR. Ensure that the PoE switch is connected to the local network, or the uplink port on the NVR.

2) Login to the SV3C Camera to verify its IP address

Using Internet Explorer or software that SV3C offers, ensure that your camera is on the same network as the NVR. Our NVRs ship with a default IP address of 192.168.1.108 and your camera must be on that same network. For example we set our camera to 192.168.1.106 as shown below. It is important to know that two cameras cannot use the same IP address. If you want to change the password on your SV3C Camera make sure that it is an alphanumeric password otherwise the NVR will not be able to connect.

The SV3C IP address on our local network

3) Add the SV3C Camera as an ONVIF device to the NVR

a) Access the web interface of your NVR
In this step you are required to login to the web interface of your NVR. The process is similar to using Internet Explorer to access a camera. Open Internet Explorer and type in http:// and the IP address for your NVR. Once logged in, navigate to the Registration screen shown below. It is found in Setup > Image > Registration or Setup > Camera > Registration.

The camera registration screen on an NVR

b) Add the Camera using a Manual Entry

Now you can add your camera to the NVR using the IP address, username, and password that is set on the camera. Make sure to select the ONVIF protocol. If your camera does not have ONVIF Authentication enabled then you may not need to use a password to connect to the camera. To do this, use the Manual Add button on the Registration screen.
Manual adding a camera through the network

c) Ensure that the camera was added successfully

After you have added your device entry you can verify that the camera connected by checking the status for the camera on the device registration screen. A green checkmark icon shows that the connection was successful. A red icon means you will need to recheck the IP address, username and password and make sure that the NVR and Camera are on the same network.

Succesfully added a camera over the network on the NVR registration screen

قیمت دوربین مداربسته تی وی تی TD-7550AS D/IR1