قیمت دوربین مداربسته تی وی تی TVT TD-7452AE1 D/SW/IR2

توضیحات

قیمت دوربین مداربسته تی وی تی TVT TD-7452AE1 D/SW/IR2

قیمت دوربین مداربسته تی وی تی TVT TD-7452AE1 D/SW/IR2

همکار گرامی جهت اطلاع ازلیست قیمت همکار کلیک فرمایید.

برای مشاهده محصولات تی وی تی کلیک کنید

با سلام و عرض ادب خدمت شما عزیزان گرامی

شرکت فنی و مهندسی علم و صنعت

سالیان سال همواره به عنوان بزرگترین وارد کننده

و پخش کننده دوربین های مدار بسته با برند های نایک ویژن Nikvision ,

هوبانتی Hubanti ,هایک ویژنHikvision ,داهوا Dahua  و سوئیچ و تجهیزات شبکه

با برند NKTECH مرتبط با سیستم های حفاظتی و امنیت، در سطح کشور مطرح بوده است.

مارک های معتبر جهانی نیز دیگر محصولات عرضه شونده توسط این شرکت را تشکیل می دهند.

اطلاعات فنی:

How to access a PoE Security Camera from a Computer

January 18, 2019 by Matthew Rossi.

How to access a PoE Security Camera from a Computer
We’re often asked how to modify an IP camera’s video settings once you already have it up and running on your NVR. This process can be difficult without any knowledge of computer networking or setting up a standalone IP camera. In this article we explain the technical details of taking a camera from the back of your NVR and connecting to it with either a direct connection or through your network.

Removing the Camera from the NVR

Our IP security cameras have a plethora of settings that can be accessed from the camera’s built-in web interface. When a camera is connected to a NVR with built-in PoE, it receives IP address and configuration settings from the NVR to keep it on an internal network. While this is great for network security reasons, it prevents direct access to the web interface of the camera. If the user wants to change the camera’s shutter rate, or IR LED strength, the camera would need to be disconnected from the NVR and accessed from a computer.

The first steps include understanding how a camera and PoE NVR work together, noting the IP address the camera is configured to and finally physically removing the camera from the NVR. The video below discusses these concepts in detail.

After having a grasp on the basics and noting the IP address of your camera you can then proceed to the next steps. There are two ways that you can connect to a camera’s web interface:

The first is through a direct connection into your Windows desktop or laptop that has an ethernet port.
The second involves going over your computer network by configuring the camera to communicate on the network.
Be sure to note the IP address of the camera before disconnecting it from the NVR, you will need it later.

A) Direct connection between IP camera and Computer
The easiest way to access an IP camera is by connecting to it directly from a computer. This method requires you have the following:

The IP address of your camera from the NVR registration page
PoE Injector or 12VDC 1A Power Adapter. It is very important to use a CCTV Camera World approved device or you risk frying the camera due to incorrect voltage
Two Ethernet cables (one if using a power adapter)
Windows 10 based PC

How to access a PoE Security Camera from a Computer
We’re often asked how to modify an IP camera’s video settings once you already have it up and running on your NVR. This process can be difficult without any knowledge of computer networking or setting up a standalone IP camera. In this article we explain the technical details of taking a camera from the back of your NVR and connecting to it with either a direct connection or through your network.